HP Z820/Z840 Workstation Motherboard Patsberg 2S/DDR3 1333MHz Version 1/2 series (708610-001, 618266-003) N

HP Z820/Z840 Workstation Motherboard Patsberg 2S/DDR3 1333MHz Version 1/2 series (708610-001, 618266-003) N

HP Z820/Z840 Workstation Motherboard Patsberg 2S/DDR3 1333MHz Version 1/2 series

Processor Type: Intel Xeon E5-2600 Version 1/2 series

• Socket: Dual LGA2011
• Chipset: Intel C602 chipset
• Number of Processor Supported: 2

Memory Type: DDR3, RDIMM (Registered) or UDIMM (Unbuffered), ECC, LR (Load Reduction) DIMMs

• Memory speed supported: 1066-MHz, 1333-MHz, & 1600-MHz
• Max. of DIMMs Supported: 16 DIMM slots, 8 DIMM per CPU
• Number of Memory Supported:
• up to 64GB using UDIMMs
• up to 256GB using RDIMMs
• up to 512GB using LRDIMMs

Note: Do not mix Memory, or are they all UDIMM, or RDIMM, or LRDIMM

Interfaces supported:

• 2-channel SATA 6.0 Gb/s Interface (2 channels e-SATA configurable)
• 4-channel SATA 3.0 Gb/s Interface
• 8-channel 6Gb SAS interface (8 SAS connectors on the motherboard), SAS ports can be ported externally by using the SAS Bulkhead and/or Back Panel connector Kits
• USB 3.0, USB 2.0, IEEE 1394a

Rear I/O:

• 1 IEEE-1394a
• 2 USB 3.0
• 4 USB 2.0
• 1 Serial
• PS/2 keyboard and mouse
• 2 RJ-45 to integrated Gigabit LAN
• 1 Audio Line-In, 1 Audio Line-Out, 1 Microphone

I/O slots:

• 3 PCI Express Gen3 x16 slots
• 1 PCI Express Gen3 x8 slot - with x16 connector
• 1 PCI Express Gen3 x4 slot - with x8 connector
• 1 PCI Express Gen2 x4 slot - with x8 connector
• 1 PCI 32-bit/33-MHz slot
• 1 Mechanical-only slot, supporting cards which mount only to the I/O bulkhead and not the motherboard (half-length, full-height)
• The PCIe x8 connectors are open-ended, allowing a PCIe x16 card to be seated in the slot.

NOTE: This BOARD Accepts Intel Xeon E5-2600 Version 1 and 2 series

Produto Novo / New.